HANGZHOU SUNWAY POWER CO., LTD. -

HANGZHOU SUNWAY POWER CO., LTD.

Showing 1 - 10 of 11, total 2 pages [First] [Previous] [Next] [Last]

composite pin insulator
Specification: 1
Detail: Line post insulators are often used in braced structures whose geometry varies from line to line. A combined loading test to reproduce the complex loading cases in such structures is outside the scope of this standard and it w...

composite station post insulator
Specification: 1
Detail: Advantages for polymer post insulator co***re to porcelain post insulator: 1. Light weight: the weight of composite station post insulator is almost one third of porcelain station post insulator. 2. Good transportation and i...

composite suspension insulator
Specification: 1
Detail: Features of composite suspension insulator or silicone rubber suspension insulator: 1. Whole molding and whole injection. 2. High mechanical strength. 3. Good resistance to flashover. 4. Small volume and light weight. 5. ...

porcelain pin insulator
Specification: ANSI 55-1, ANSI 55-2, ANSI 55-3, ANSI 55-4, ANSI 55-5, ANSI 55-6
Detail: Usage: Rigid insulator, suitable for distribution lines to insulate and support conductor.The top can have semi-conductor/radio silent glaze or without semi-conductor/radio silent glaze.The applicable voltage is less than 46kV...

composite railway insulator
Specification: 1
Detail: Benefits include: 1.Light weight 2.I***ct and vandal resistant 3.High pollution resistance 4.Low profile - makes them less environmentally obtrusive 5.Flameproof 6.A wide range of substrates and end fittings ...

toughened glass insulator
Specification: 1
Detail: System Voltage: 11kV, 33kV, 66kV(69kV), 110kV,132kV, 220kV,230kV, 400kV, 500kV£¬ 750kV Specified Mechanical Load (SML): 70kN, 120kN, 160kN, 210kN, 300kN, 420KN Color: Green, and customer's requirement. Applicable Standard:...

composite cross arm insulator
Specification: Composite cross arm insulator
Detail: Composite cross arm insulator characters: One end fitting with holes can be fixed onto the electrical poles, replace the traditional crossarm, save cost. One end fitting with grooves can fix conductor onto the crossarm high ...

porcelain disc insulator
Specification: U40B, U40C, U70BL, U70BS, U70BLP, U120B, U120BS, U120BL, U120BL
Detail: Usage: Porcelain disc insulator, with the most operating experiences, is widely used in high voltage transmission and distribution lines to hang or tension the conductor for its good performance of insulation property, mechani...

porcelain strain(stay) insulator
Specification: 54-1, 54-2, 54-3, 54-4 according to ANSI C29.4GY1, GY2, GY3, GY4
Detail: Stay insulator - A dead end or anchor pole or tower is used where a straight section of line ends, or angles off in another direction. These poles must withstand the lateral (horizontal) tension of the long straight section of...

porcelain shackle(reel, spool) insulator
Specification: 53-1, 53-2, 53-3, 53-4, 53-5, ED-2B, ED-2C
Detail: Shackle insulator - In early days, the shackle insulators were used as strain insulators. But now a day, they are frequently used for low voltage distribution lines. Such insulators can be used either in a horizontal position ...


Showing 1 - 10 of 11, total 2 pages [First] [Previous] [Next] [Last]
1 2